 |
RC to DC Converter
0 to 5 Volt Output
12 Bit DAC
|
Applications
- Aerospace
- U.A.Vs. / R.P.Vs.
- Robotics
- Animatronics
- R/C and Digital Conversions
|
Features
- Plugs directly into Fatuba™ type radio receivers.
- Wide Power Supply Range
- Stores last valid pulse
- Small Size
|
This precision device converts standard R/C servo style PPC signals
to an analog DC output with12 bit resolution. The output is stable with input
changes such as: supply voltage, pulse amplitude, frequency and temperature.
Programable options include: output scaling within 0 to 5 volts, positive or
negative going, valid pulse width cut off points, and a second order filter for
different time constants (T/C) output filter rates. All programs are factory set.
Specifications
Inputs:
| Supply Voltage: | 3.25 to 6.25 Volts 5 Volts Normal |
| Current: | 10ma. typ. |
| Ground: | Connect to signal ground only |
| R/C Input: | Standard servo type PCM. Positive going. |
| Pulse width valid range: | 1.0 to 2.0 ms (1.5ms neutral)(STD) |
| Pulse frequency range: | Valid from 25-125 Hz. (50 Hz. Normal) |
| Input Logic Gate: | 74HCT Series |
| Input Resolution: | 0.4us |
Outputs:
| +5 Volt Ref.: | 5.00 Volts �.05V @ 10ma. User assignable. |
| Ground: | Connect to signal ground only. |
| DC Analog Output: | Programmable within 0.050 to 4.950 Volts @ 15ma. |
| Output Device: | Op Amp (Op295) |
| Output Default: | Power up with no pulse = lower DC limit. i.e. 1.25VDC |
| Resolution: | 1.25mv @ 12 bits |
| Output Drift: | �.5% full scale and per 10�C |
|
Program Options:
- T/C Filter Rate Codes
- 3 = 1 msec
- 6 = Standard
- 9 = 1 sec
- Output Range
- A) 0.05 to 4.95 Volts
- B) 1.25 to 3.75 Volts
- C) 0.75 to 4.25 Volts
- User Defined
- Vaild Pulse Width Range
- 1.00 to 2.00 msec
- User Defined
|
